Tag Archives: Wire Pulling

HEAVY DUTY CLEVIS FOR WIRE PULLING

HOUSTON, TX – RectorSeal introduces a heavy duty wire pulling clevis to its line of wire pulling tools. RectorSeal® Wire Pulling Clevis Clip is used to connect pulling rope to Wire Snagger® and Wire Grabber™.

 

Wire Snagger® pulling tools with spring-activated gripping teeth have revolutionized electrical cable pulling since their introduction in 2005.  Set-up and tear-down time for multiple wire pulls has been reduced to a few minutes. Now, RectorSeal® has added additional innovative tools to increase daily productivity for electrical contractors.

 

The RectorSeal® Wire Pulling Clevis Clip is a heavy duty, universal clevis clip for connecting Wire Snagger®, Wire Grabber™ Crimp-On and Wire Grabber™ Single-Use to pulling rope. The maximum rated capacity working weight is 11,000 lbs. wire pulling only. The Clevis is a fast and easy way to connect to a pulling rope and passes through offsets and 90º bends easily.

 

RectorSeal® Wire Pulling Clevis Clip innovative, labor saving tool for electrical contractors is now available through RectorSeal’s® nationwide distribution network or by calling customer service at 1-800-231-3345.

 

The RectorSeal Corporation is celebrating its 75th anniversary as a leading manufacturer of chemical and specialty products designed for professional tradesmen. Steady growth over the years has been maintained through a commitment to providing high quality products and services.  With a diversified business strategy, RectorSeal® aggressively pursues new and unique technologies to serve the electrical, plumbing, heating, air conditioning, and construction industries with   innovative quality products supported by strong customer and technical service.

 

     RectorSeal Corporation, 2601 Spenwick Drive, Houston, Texas 77055

     www.rectorseal.com

SINGLE USE SOLUTION FOR WIRE PULLING

SINGLE USE SOLUTION FOR WIRE PULLING
HOUSTON, TX – RectorSeal introduces a new, low cost single use device for pulling wire. Simple- Easy- Reliable- Durable. RectorSeal® Single-Use Wire Grabber™ is used once, and is then recycled along with the scrap wire. 

This innovative tool is ideal for contractors who do only occasional wire pulls. It is an economical alternative with a low initial cost that will save Electrical Contractors on labor hours and drastically reduce the cost of setting up multiple wire pulls. Set-up time for a 4 wire pull is less than 5 minutes. This allows an Electrical Contractor to pull four times as much wire within a day.

The RectorSeal® Single-Use Wire Grabber™ is available in 18 sizes (8 AWG through 1000 mcm) to be used in sets to accommodate jobs of different sizes. Works on 600 volts through 35 KV wire and rated for both copper and aluminum wire. The lanyards are available in a variety of lengths to make staggering multiple wire pulls effortless especially through and around nineties. The small pulling head reduces friction; therefore there is no need to oversize conduit to accommodate the pulling head. 

Pulls are made by stripping the wire jacket back 3 inches and then, crimping the lug with 2 crimps on the wire using a hydraulic die or dieless crimper, and then start pulling. Strip it, Crimp it, Pull it – it is that easy!      

RectorSeal® Single-Use Wire Grabber™ innovative, labor saving tool for electrical contractors is now available through RectorSeal’s® nationwide distribution network or by calling customer service at 1-800-231-3345. 

Founded in 1937, RectorSeal® Corporation is a leading manufacturer of chemical and specialty products designed for professional tradesmen. Steady growth over the years has been maintained through a commitment to providing high quality products and services.  With a diversified business strategy, RectorSeal® aggressively pursues new and unique technologies to serve the electrical, plumbing, heating, air conditioning, and construction industries with   innovative quality products supported by strong customer and technical service. 

     RectorSeal Corporation, 2601 Spenwick Drive, Houston, Texas 77055
     www.rectorseal.com